The feasibility of using red mud in coatings based on glyptal resins
Тип публікації :
Стаття
Дата випуску :
2020
Автор(и) :
Melnyk, Liubov
Myronyuk, Oleksiy
Ratushniy, Volodymyr
Baklan, Denys
Мова основного тексту :
Англійська
eKNUTSHIR URL :
Том :
8
Випуск :
1
ISSN :
2312-3222
Початкова сторінка :
88
Кінцева сторінка :
94
Цитування :
[APA 7] Melnyk, L., Myronyuk, O., Ratushniy, V., & Baklan, D. (2020). The feasibility of using red mud in coatings based on glyptal resins. French-Ukrainian Journal of Chemistry, 8(1), 88–94. https://doi.org/10.17721/fujcV8I1P88-94
[ДСТУ] The feasibility of using red mud in coatings based on glyptal resins / L. Melnyk et al. French-Ukrainian Journal of Chemistry. 2020. Vol. 8, no. 1. P. 88—94. DOI: 10.17721/fujcV8I1P88-94 (date of access: 18.07.2026).
The possibility of industrial waste – alkaline red mud to be used as the filler of glyptal resins and coatings thereof is considered. It was determined that the most effective way of compounding of said components was in situ combinations during the synthesis of the polymer, providing systems with filling factor up to 36 wt.% with decreased moisture absorption ability in comparison to the initial resin. It was demonstrated that the most probable cause of this performance increase is the formation of chemical bonds between the hydroxyl groups of glyptal and weak van der Waals bonds between the carbonyl group of the resin and surface groups on red mud.
Файл(и) :![Ескіз]()
Вантажиться...
Формат :
Adobe PDF
Розмір :
1.84 MB
Контрольна сума :
(MD5):e5526a62b0ff6b95edde7cc66f171562
Якщо не вказано інше, ця робота розповсюджується на умовах ліцензії Creative Commons Attribution 4.0 International