Analytical model of deformation of flange with concatenated shell under internal pressure

Kutsenko, O. G., Kharytonov, O. M., Kharytonova, L. V. (2019). Analytical model of deformation of flange with concatenated shell under internal pressure. Bulletin of Taras Shevchenko National University of Kyiv. Physics and Mathematics(1), 98–101. https://doi.org/10.17721/1812-5409.2019/1.22

The rings torsion theory that is based on the assumption about flat rigid cross-section was suggested by the authors in the previous papers. The analytical expressions of torsional stiffness have been derived for different kind of loads: pure moment, shear force and surface pressure. In the present paper the analytical model of flange with attached cylindrical shell deforming under internal pressure is suggested. The mechanical system is split into two parts (flange and shell) with the help of imaginary section method. An unknown shear force and bending moments are applied to both parts according to this method. Therefore flange is loaded under internal pressure, shear force and bending moments. As mentioned above, for all these loads the angle of flange cross-section rotation can be presented in analytical form based on the rings torsion theory. Full rotation angle is presented as a sum of these angles. The radial displacement of imaginary section was determined on the basis of the assumption about flat rigid cross-section. On another hand, the rotation angle and radial displacement of imaginary section are determined on the base of the cylindrical shell bending theory too. Two linear equations in the unknown shear force and bending moment were derived by equating corresponding expressions. In such ? way the analytical model of flange with attached shell deforming was built. The comparison calculations by finite element methods confirmed the adequacy of proposed model.Key words: analytical model, flange, shell, internal pressure, rings torsion theory.Pages of the article in the issue: 98-101Language of the article: Ukrainian